Skip to content
Request a demo

Hydraulic Frac Data Centralization

Peloton Frac standardizes hydraulic fracturing data from any frac provider, loads stage summaries and costs into WellView automatically, and connects them with production performance in ProdView. Completions teams get one view of frac activity and production outcomes, with better data quality and oversight across the well lifecycle.

One U.S. operator running two frac crews cut the wait for stage data in WellView from about 3 hours to 20 minutes with Peloton Frac.

Request a Demo Explore Peloton Frac
Frac crew member turning a valve handle on the manifold between rows of frac pumps on a multi-well pad

35+ YEARS

of energy expertise

700+ CLIENTS

worldwide

SOC 1 & 2 TYPE 2

security on Microsoft Azure

20 MIN

From stage end to treating data in WellView, down from about 3 hours

94%

Fewer corrections to WellView frac records

14 HRS

A week back for consultants across two frac crews

89%

Less cleanup per well, from 90 minutes down to 10

10 MIN

Saved on data input in every stage cycle

What Is Frac Data Centralization?

Frac data centralization is capturing hydraulic fracturing data from every frac provider in one consistent format, linked to the well record, instead of spread across vendor reports, spreadsheets and siloed systems.

When completions teams consolidate frac data by hand, retyping it into Excel frac loaders and then into WellView one stage at a time, workflows slow down, errors creep in, and analyzing completions across wells becomes difficult.

Peloton Frac standardizes the data from any provider, loads stage summaries and costs into WellView automatically, and connects them with production performance in ProdView, so teams see frac activity and production outcomes together.

Where Manual Frac Data Falls Short

The same five jobs, run two ways.

Frac data: manual consolidation compared with Peloton Frac.
JobExcel frac loaders, vendor reports and spreadsheetsPeloton Frac
Data format

Each frac provider’s data in its own format

Stage summaries and costs in one standard, whatever the provider

Getting data in

Retyped into an Excel frac loader, exported as WVXML, then loaded into WellView

Captured, reconciled and loaded into WellView automatically

Speed

About 3 hours from stage end to WellView

20 minutes in one operator’s results, so engineers review during the job

Accuracy

Miskeys and double typing to clean up

94% fewer corrections to frac records in one operator’s results

Analysis

Hard to analyze completions across wells

Frac activity and production outcomes in one view

How Frac Data Centralization Works in Peloton

From each frac provider’s stage data to future well completions, these are the steps.

  1. Connect each frac provider

    Frac providers deliver data their own way. Peloton Frac takes it from a provider’s server, over an ethernet cable from the data van, or through cloud streaming connections Peloton built with industry partners, with structured vendor templates that keep submissions consistent.

  2. Reconcile every stage

    Peloton Frac reconciles stage data before it loads, which removes miskeys and double typing.

  3. Load stage summaries into WellView

    Standardized stage summaries and costs load into the well record in WellView automatically, so office engineers can review treating data while the job is still running.

  4. Connect to production

    Frac stage data is linked automatically to production performance in ProdView.

  5. Improve future completions

    Seeing frac activity and production outcomes together, with lookbacks across wells, stages and completion designs, gives the team a clearer understanding of well performance and insights that improve future well completions.

Crew member walking toward a land drilling rig on its pad at dusk

Linking Frac Data to Production Outcomes

With stage data and costs in WellView minutes after each stage ends, office engineers review performance during the job. Connecting frac stage data with production outcomes then gives completions teams a clearer understanding of well performance and insights that improve future well completions.

Request a DemoExplore Peloton Frac

Two Frac Crews, One Data Standard

A U.S. operator running two frac crews compared pads before and after Peloton Frac.

Challenge

As the frac program grew, consultants spent too much time moving digital frac data into Excel and then into WellView, one stage at a time. Each frac provider delivered data its own way, which made a slow process inconsistent and prone to errors. The operator needed one repeatable approach across both crews.

Solution

The operator rolled out Peloton Frac in stages: sandbox testing, a pilot with each crew streaming to a test environment alongside normal operations, data cleanup, then go-live with training. Stage summaries and costs now load into WellView automatically, whichever provider runs the job.

Outcome

In a pad-to-pad comparison before and after Peloton Frac, the operator reported:

  • Stage data in WellView in 20 minutes, not about 3 hours
  • 94% fewer corrections to WellView frac records
  • 14 hours a week back for consultants
  • Cleanup per well cut from 90 minutes to 10

Peloton Frac: Frac Data in the Well Record

Peloton Frac standardizes frac data from any provider, loads it into WellView and connects it with production performance in ProdView.

Peloton Frac

Any frac provider, one data standard: stage summaries and costs reconciled and loaded into WellView automatically, and a unified view of frac activity and production outcomes.

  • Data from any frac provider
  • Automatic loading into WellView
  • Reconciled before loading
  • Structured vendor templates
  • Production performance in ProdView
  • Lookbacks across wells and stages
Explore Peloton FracSee It on Your Wells

Frac Data Questions

What is hydraulic frac data centralization?

It means capturing hydraulic fracturing data from every frac provider in one consistent format, linked to the well record. Peloton Frac centralizes this data in WellView and connects it with production performance in ProdView, giving completions teams a unified view of frac activity and production outcomes.

How do vendors submit frac data to Peloton Frac?

Each frac provider delivers data its own way. Peloton Frac takes it from a provider’s server, over an ethernet cable from the data van through the Peloton Frac Field Client, or through cloud streaming connections Peloton built with industry partners. Structured vendor templates keep submissions consistent, and Peloton Frac reconciles the data and loads stage summaries and costs into WellView automatically.

How fast does frac stage data reach WellView?

In one U.S. operator’s pad-to-pad comparison, treating data and costs reached WellView 20 minutes after each stage ended, down from about 3 hours with Excel frac loaders. With Peloton Frac, office engineers at that operator review performance during the job and make adjustments sooner, instead of waiting for the data.

How does Peloton Frac link frac data to production?

Peloton Frac links frac stage data automatically to production performance in ProdView. By connecting frac stage data with production outcomes, completions teams gain a clearer understanding of well performance and optimization opportunities, and insights that improve future well completions.

Why is manual frac data consolidation a problem?

When frac data is retyped into Excel frac loaders, exported and loaded one stage at a time, or spread across vendor reports and siloed systems, workflows slow down, miskeys creep in and completions are hard to analyze across wells. Peloton Frac replaces that with data reconciled once and loaded into WellView automatically, with less administrative effort.

What results has an operator seen with Peloton Frac?

A U.S. operator running two frac crews compared pads before and after Peloton Frac. It reported 94% fewer corrections to WellView frac records, 14 hours a week back for consultants, data input per stage cycle down from 30 to 20 minutes, and cleanup per well down from 90 minutes to 10, about 16 fewer hours a month of auditing.

How does an operator roll out Peloton Frac?

One operator rolled out Peloton Frac in four steps: sandbox testing, a pilot with each crew streaming to a test environment alongside normal operations, data cleanup in production, then go-live with training. Its lessons: cleaning historical and acquired data is a large job, and field buy-in comes from one-on-one training and dedicated field IT support.

What Customers Say About Working with Peloton

Peloton delivers robust data capture and reporting across the well lifecycle, backed by top-tier support and a visionary, unified app strategy.

– D&C Manager

Peloton puts more real-time R&D in their products than any other oil and gas software vendor out there, and I have used a lot of them.

– Engineering Technician

Having our production data in the Peloton data model through ProdView has given us seemingly infinite integration possibilities with SiteView and WellView data.

– Area Engineer

See Frac Data Centralization in Action

See how Peloton Frac loads frac data from any provider into WellView and links it to production performance in ProdView.

Request a Peloton Frac Demo

A Peloton specialist will follow up to schedule.